Guide on How To Remove Rust From Stainless Steel Kettle 2023

How To Remove Rust From Stainless Steel Kettle

Finding it difficult on how to remove rust from stainless steel kettle? Don’t worry as this article will be a game changer for you!!

A tea kettle differs from a teapot. A kettle is a jar that is used to heat water on the stove to prepare tea, which is then poured into a teapot and served.

Teapots are mostly decorative; they are not designed to withstand the extreme temps used for stovetop cooking. Taking a look inside your tea kettle after weeks (er, months) of not seeing the inside can be a frightening experience. Particularly if you use hard water, you can find layer after layer of limescale.

And if you leave water in your tea kettle for days on end, don’t be surprised if rust begins to form. The good news is that it’s never too late to learn how to scrub a tea kettle properly, even though you’ve put it off for a while. Fortunately, the procedure, which is outlined below, is as simple as making a cup of tea. After each use of our tea kettles, we should all continue by following the usual washing by hands technique.

However, if rust and mineral deposits have already taken hold, try the deep-cleaning methods mentioned below, such as the lemon and baking soda technique. 

Video on How To Remove Rust From Stainless Steel Kettle

Why should you clean your kettle?

Long period of putting off the cleaning of your kettle can result in damage to the appliance and the need for deep cleaning, which may or may not be effective. The most common issue is limescale build-up, which results in higher energy demand since the kettle takes longer to steam up the water. Furthermore, limescale has an impact on the temperature of the water, which continues to deteriorate the longer the kettle is neglected.

Since limescale forms when hard water is heated and then left in a pot, the only way to prevent it is to never leave the liquid in the appliance. Additionally, using the kettle for heating necessitates more thorough washing.  Cleaning duration is largely determined by where you live and the consistency of the water available. Check your kettle at least once a week, and if you spot any hard white deposits, get to work straight away.   

Also Read: How To Prevent Milk From Curdling

Effective methods to cleaning oven racks:

Getting a cup of coffee in the morning, a good cup of tea, or even soup has never been a privilege nevertheless, the luxury of doing so is jeopardised if the machine is not adequately cleaned. More seriously, our wellbeing could be compromised if we don’t know how to clean and descale the kettle. So, down below I have listed some remedies for descaling and removing rust from your kettle at home.

Using vinegar to clean the kettle: White vinegar is an essential ingredient to use in your homemade method to descale since acid is an appropriate hard water stain remover. This is a straightforward technique for washing a kettle, whether it’s made of stainless steel, plastic, glass, or another material.

The technique consists of following steps:

  • To begin, weigh two cups of white vinegar and enough water to cover the damaged areas of the kettle, then pour the mixture into the kettle.
  • Allow the solution to come to a boil before unplugging the appliance and leave it inside for 15-20 minutes.
  • Scrub the interior with a toothbrush, paying special attention to the edges and all those hard-to-reach spots in which rust stains like to hide.
  • After that, clean the kettle at least 2-3 times before putting it away to dry.
  • To check the outcome of your work to see if any rust stains remain, bring water to a boil in the kettle.

If limescale has been left to build up for a long time, it can be more difficult to remove. In this case, the descaling process must be repeated, this time with a pure vinegar solution, before satisfactory results are obtained. You can also do several cycles, starting with vinegar and ending with lemons.

Also Read: How To Remove Rust From Stainless Steel utensils

Using lemon and water to clean a kettle:

Using a lemon and water solution to clean a kettle is a natural and healthier alternative to harmful chemicals. The lemons will not only remove the rust stains, but they will also shine the interior of the kettle and give it a fresh scent. It consists of following steps:

  • Cut and squeeze lemons: Round a lemon in half and squeeze the juice into the kettle. When you’re finished, rub the inner pieces of the two halves together to clear any rough water stains. Slice the lemon into tiny bits and place them in the kettle with the lemon juice.
  • Prepare a mixture: Apply about 500 millilitres of distilled water to the mixture now. You don’t have to fill the kettle all the way to the top; just enough to cover the bottom aspects and halfway fill the kettle.
  • Bring the mixture to boil: Start the kettle and get the mixture to a boil. Allow 15 minutes for it to simmer. Disconnect the kettle from the power supply after that. Allow for a couple of hours for the kettle to cool down.
  • Scrub the kettle with brush: Don’t toss the lemon water just yet. Scrub inner surface and outside of the kettle vigorously with a fluffy sponge.
  • Clean the kettle by rinsing it and allowing it to air dry: Drain the liquid and clean the kettle with hot water 4-5 times. Dry the exterior of the kettle with a microfiber rag.
  • Get rid of lemon taste: Pour about half a litre of water for another 15 minutes before using the kettle to get rid of any residual lemon flavour.

To stop dangers, make sure the kettle is fully dry on the outside before attaching it to a power source.

Also Read: How To Remove Rust From Oven Racks

Baking soda should be used to clean a pot:

A baking soda and water solution is another natural cleaning alternative. For your wellbeing, make sure the kettle is unplugged before you begin washing. There are two methods for this.

  1. Method one: Combine a teaspoon of baking soda and 500 mL of water in a mixing bowl. Fill the kettle halfway with water and bring it to a boil for 15 minutes. Allow another 15 minutes for the mixture to sit in the kettle. Pour out the solvent and clean the inside with cold water a couple of times.
  2. Method two: Using a tablespoon of baking soda and a few bits of water, make the mixture. Whisk until the paste is fully consistent. Scrub with a toothbrush until the limescale starts to come off. Then rinse and boil to check the water quality to see if any additional cleaning is needed.

How to clean the outside of the kettle: Make a solution of warm water and dish soap to disinfect the exterior of the kettle. Using a fluffy towel to clean the exterior of the kettle. Rinse it well with water and pat it dry with a microfiber rag. Make sure there’s no soap and water inside the kettle. Make it your habit to clean the exterior of your kettle every two weeks or so. Even, avoid submerging the appliance in a sink full of water. It has the potential to permanently destroy the heating elements of your kettle.

How to remove rust from the exterior of kettle?

Kettles are continually exposed to water and can rust if kept in an environment of hard water or if there is moisture left in the kettle. To keep rust from forming in your kettle, quickly wipe it down after each use. If your stainless steel kettle has rust, you can cure it by softly scrubbing the rust stains with a wire brush. Using cool spray, rinse the excess away.

If the kettle also has rust stains, consider dipping it in Coca-Cola. Pour enough coke to reach the bottom of the container and set it aside for 20 minutes. You can need to soak it overnight if there is a lot of rust left. Remove the coke and properly rinse the kettle with warm water.

Tips in cleaning kettle:

I have mentioned tips below that will be helpful in taking care of your stainless-steel kettle:

  • Regularly rinse the kettle by spritzing baking soda inside and scrubbing the inside with a fluffy sponge to remove any limescale and rust stains.
  • Remove the filter from the kettle and soak it in a cup of vinegar for 10 minutes to dissolve the persistent limescale and rust residue. To clean it, use a gentle sponge and rinse it gently. After that, clean it with water and let it air dry.
  • Since the heating elements of the kettle have a special protective coating, you should NOT scrub them. If you wipe it out, you risk damaging the appliance for the rest of the life. 
  • If you’re not going to use the water, don’t leave it in the kettle for too long. It will rust and also can damage the elements.

To end, nobody enjoys cleaning the kettle everyday especially when you have other tasks to do. But it is important to wipe down your tea kettle to prevent greasy gunk from accumulating on the outside. Cleaning your tea kettle when wiping off your counters is a simple way to do this. To rinse the kettle, use a wet cloth soaked in clean water or vinegar. baked-on food spills, but at the end of the day we all have to or should do it. 

Reference

Leave a Comment